SN74ABT573APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT573APWR Overview
20-TSSOP (0.173, 4.40mm Width) contains it. A package of Cut Tape (CT) has been used. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ABT series. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74ABT573. In order to operate it, the supply voltage must be 5V. 20 pins are provided. In terms of electronic devices, this one is in the ABT family. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. The system is powered by 5V sources. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is appropriate for TR. The 64mA output current gives it maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. There are 3 output lines that correspond to the binary equivalents of the input line. Without external influences, it consumes 24mA quiescent current.
SN74ABT573APWR Features
20-TSSOP (0.173, 4.40mm Width) package
74ABT series
8 Bits
74ABT573 family
20 pin count
20 pins
5V power supplies
SN74ABT573APWR Applications
There are a lot of Texas Instruments SN74ABT573APWR Latches applications.
- Up-Down Johnson
- Counter control
- Parallel-to-Serial Data Conversion
- BCD counting
- Parallel data storage
- Address register
- Network Switches
- Shift Registers
- Flip-flops
- Shift register
