SN74ABT573ARGYRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.7 ns |
| Turn On Delay Time | 4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Length | 4.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT573ARGYRG4 Overview
In the VQFN package, it is embedded. A Tape and Reel package is used to package it. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device is operated when the supply voltage is set to 5V. 20 pins are provided. This electronic device is categorized as a ABT electronic device. In addition, it is designed with a pin number of 20. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. Subcategory FF/Latches contains this part. There are 5V power supplies required for this machine to operate. Optimal efficiency requires 5V as the supply voltage. Its superior flexibility is achieved by using 8 circuits. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. It has been set to 32mA for the low level output current. There is -32mA high level output current set. Lower than 85°C is the recommended operating temperature. The operating temperature should be higher than -40°C. There is a maximum supply voltage of 5.5V supported by this device. In order for the machine to operate, the supply voltage must be 4.5V. As far as the logic IC is concerned, it uses BUS DRIVER.
SN74ABT573ARGYRG4 Features
VQFN package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ABT573ARGYRG4 Applications
There are a lot of Texas Instruments SN74ABT573ARGYRG4 Latches applications.
- Buffer/Storage Registers
- Multi-line decoders
- Hammer Device Information
- Network Switches
- Storage
- Relay
- Frequency
- Display driver
- Registers
- Counter control
