SN74ABT574ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.6 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT574ADW Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. It should not exceed 200MHzin terms of its output frequency. A total of 1 elements are present. There is a consumption of 250μAof quiescent energy. A total of 20 terminations have been made. If you search by 74ABT574, you will find similar parts. An input voltage of 5Vpowers the D latch. A 3.5pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of ABT. There is an electronic component mounted in the way of Surface Mount. There are 20pins on it. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. An electronic part designed with 8bits is used in this application. To achieve this superior flexibility, 8 circuits are used. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. Its output current of 64mAallows for maximum design flexibility. It has 3 output lines to operate. In terms of quiescent current, it consumes 30mA .
SN74ABT574ADW Features
Tube package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT574ADW Applications
There are a lot of Texas Instruments SN74ABT574ADW Flip Flops applications.
- Bus hold
- EMI reduction circuitry
- Functionally equivalent to the MC10/100EL29
- Individual Asynchronous Resets
- Storage registers
- Digital electronics systems
- Latch
- ATE
- Automotive
- Asynchronous counter
