SN74ABT574APWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Power Supply Current-Max (ICC) | 30mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT574APWRG4 Overview
The flip flop is packaged in TSSOP. Currently, the output is configured to use TTL. In total, it contains 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power supply voltage is 5V. It belongs to the family of electronic devices known as ABT. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 5V. There is also a characteristic of BROADSIDE VERSION OF 374. A -32mAvalue is set for the high level output current. 64mAis set as the low level output current. Temperatures below 85°Care ideal for operating. In order for the system to operate properly, the temperature should be higher than -40°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. 5.5Vis its maximum supply voltage. It is possible to obtain a frequency of 200MHz. This logic IC is BUS DRIVER. It has 1 functions. It is equipped with 20 pins. The output current of 64mA makes it feature maximum design flexibility.
SN74ABT574APWRG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ABT574APWRG4 Applications
There are a lot of Texas Instruments SN74ABT574APWRG4 Flip Flops applications.
- Synchronous counter
- Functionally equivalent to the MC10/100EL29
- Frequency division
- Data storage
- Single Up Count-Control Line
- Shift Registers
- Shift registers
- Single Down Count-Control Line
- Computing
- Convert a momentary switch to a toggle switch
