SN74ABT574ARGYR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT574ARGYR Overview
The item is packaged in 20-VFQFN Exposed Padcases. Package Cut Tape (CT)embeds it. It is configured with Tri-State, Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. The 74ABTseries comprises this type of FPGA. A frequency of 200MHzshould not be exceeded by its output. D latch consists of 1 elements. As a result, it consumes 250μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74ABT574family make up this object. A voltage of 5V is used to power it. There is 3.5pF input capacitance for this T flip flop. It is a member of the ABTfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. The superior flexibility is achieved through the use of 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A power supply of 5Vis required to operate it. The flip flop has 2ports embedded within it. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 64mA, this device offers maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
SN74ABT574ARGYR Features
Cut Tape (CT) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT574ARGYR Applications
There are a lot of Texas Instruments SN74ABT574ARGYR Flip Flops applications.
- Digital electronics systems
- Frequency Dividers
- Cold spare funcion
- Differential Individual
- Individual Asynchronous Resets
- Frequency Divider circuits
- Safety Clamp
- Control circuits
- 2 – Bit synchronous counter
- Pattern generators
