SN74ABT574ARGYRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.6 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT574ARGYRG4 Overview
The flip flop is packaged in 20-VFQFN Exposed Pad. It is included in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74ABT series. There should be no greater frequency than 200MHzon its output. There are 1 elements in it. It consumes 250μA of quiescent There are 20 terminations,This D latch belongs to the family of 74ABT574. It is powered from a supply voltage of 5V. A 3.5pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of ABT. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. 8bits are used in its design. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 5V volts. This D flip flop is equipped with 0 ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With a current output of 64mA , it offers maximum design flexibility. There are 3 output lines in this JK flip flop. The number of input lines is 8.
SN74ABT574ARGYRG4 Features
Tape & Reel (TR) package
74ABT series
20 pins
8 Bits
5V power supplies
SN74ABT574ARGYRG4 Applications
There are a lot of Texas Instruments SN74ABT574ARGYRG4 Flip Flops applications.
- Patented noise
- Data Synchronizers
- Frequency Divider circuits
- Registers
- Functionally equivalent to the MC10/100EL29
- Latch
- Individual Asynchronous Resets
- Differential Individual
- Data transfer
- Guaranteed simultaneous switching noise level
