SN74ABT7819A-15PH
| Parameters | |
|---|---|
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | 74ABT7819 |
| Function | Synchronous |
| Current - Supply (Max) | 95mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 18K 512 x 18 x 2 |
| Clock Frequency | 67MHz |
| Access Time | 10ns |
| Data Rate | 67MHz |
| Organization | 512KX18 |
| Memory Width | 18 |
| Memory Density | 9437184 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Bi-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.1mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-BQFP |
| Number of Pins | 80 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
SN74ABT7819A-15PH Overview
FIFO memory chip can be found in the 80-BQFP package.In this case, it is packaged in case number Tray .There is a memory of 18K 512 x 18 x 2 available for storing data and applications.Keeping the temperature at 0°C~70°C will ensure reliable operation.Surface Mount is the mounting type of the FIFO memory.Operation is based on a supply voltage of 4.5V~5.5V .A component in the 74ABT series, this is an memory logic.A maximum operating supply current of 95mA is provided by this FIFO products.Mounting it Surface Mount is recommended.Memory IC belongs to the family of 74ABT7819 .A supply voltage of 5V is capable of producing high efficiency.A total of 80 terminations are contained within FIFO means.80 pins are used for operation.FIFOs contains this gadget in its entirety.A component normally has 5V power supplies attached to it.Vsup is set to 5.5V (FIFO memory IC's maximum supply voltage).In order to ensure normal operation, the supply voltage (Vsup) should be kept above 4.5V .A clock running at frequency 67MHz is used by the FIFO memory IC.
SN74ABT7819A-15PH Features
18K 512 x 18 x 2 memory size
74ABT series
Best part number of 74ABT7819
FIFOs category
Clock frequency of 67MHz
SN74ABT7819A-15PH Applications
There are a lot of Texas Instruments SN74ABT7819A-15PH FIFOs Memory applications.
- Firmware loaders
- Application that requires re-writable nonvolatile parameter memory
- Consumer Systems
- Transistors
- MP3 Interface for Automobile
- Address mapping
- IP Radio
- Networking
- Programmable Logic Controller
- TVs
