SN74ABT821ADBR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Clock Frequency | 125MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 10 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
SN74ABT821ADBR Overview
In the form of 24-SSOP (0.209, 5.30mm Width), it has been packaged. D flip flop is embedded in the Cut Tape (CT) package. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. You should not exceed 125MHzin the output frequency of the device. A total of 1elements are present in it. T flip flop consumes 250μA quiescent energy. A total of 24terminations have been recorded. The 74ABT821family includes it. The power source is powered by 5V. This JK flip flop has a 3.5pFfarad input capacitance. It belongs to the family of electronic devices known as ABT. It is mounted by the way of Surface Mount. There are 24pins on it. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Flip flops designed with 10bits are used in this part. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The flip flop has 2embedded ports. In order to ensure high efficiency, the supply voltage should remain at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. To operate, the chip has a total of 3 output lines. As of now, there are 10input lines.
SN74ABT821ADBR Features
Cut Tape (CT) package
74ABT series
24 pins
10 Bits
5V power supplies
SN74ABT821ADBR Applications
There are a lot of Texas Instruments SN74ABT821ADBR Flip Flops applications.
- Data Synchronizers
- Modulo – n – counter
- Supports Live Insertion
- Common Clocks
- ESD performance
- Parallel data storage
- Test & Measurement
- Set-reset capability
- Matched Rise and Fall
- Balanced Propagation Delays
