SN74ABT823DBR
| Parameters | |
|---|---|
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Clock Frequency | 200MHz |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 4.3 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 250μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
SN74ABT823DBR Overview
The package is in the form of 24-SSOP (0.209, 5.30mm Width). The package Cut Tape (CT)contains it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. This type of FPGA is a part of the 74ABT series. This D flip flop should not have a frequency greater than 200MHz. A total of 1elements are contained within it. There is a consumption of 250μAof quiescent energy. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ABT823 family contains this object. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 4pF farads. Devices in the ABTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 24. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. There are 9bits in this flip flop. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. There are 5V power supplies attached to it. The D flip flop has no ports embedded. If high efficiency is desired, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It has 9lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74ABT823DBR Features
Cut Tape (CT) package
74ABT series
24 pins
9 Bits
5V power supplies
SN74ABT823DBR Applications
There are a lot of Texas Instruments SN74ABT823DBR Flip Flops applications.
- Memory
- QML qualified product
- Matched Rise and Fall
- Control circuits
- Load Control
- ESD performance
- Consumer
- Asynchronous counter
- Reduced system switching noise
- 2 – Bit synchronous counter
