SN74ABT841ADBR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT841ADBR Overview
A package called 24-SSOP (0.209, 5.30mm Width) contains it. Cut Tape (CT) is the way in which it is packaged. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is -40°C~85°C. This FPGA is part of the 74ABT series. There are 10 bits in this electronic part. This device has been designed with 24 terminations available. There is no doubt that it belongs to the family 74ABT841. The device works with a voltage of 5V for its supply voltage. It is equipped with 24 pin count. This electronic device is categorized as a ABT electronic device. The pin configuration of the device is 24. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. Bus Driver/Transceiver is the subcategory of this part. A total of 5V power supplies are required for it to operate. As a result of its reliable performance, it is well suited for TR. Its output current of 64mA ensures maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. Input lines are generated as binary equivalents by 3 output lines. It consumes 1μA of quiescent current without being affected by outside factors. This element consists of 1.
SN74ABT841ADBR Features
24-SSOP (0.209, 5.30mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ABT841ADBR Applications
There are a lot of Texas Instruments SN74ABT841ADBR Latches applications.
- Instrumentation
- General-Purpose Register
- Bus system register with enable parallel lines at bus side
- Shift right register
- Parallel-to-Serial Data Conversion
- Shift Registers
- Pseudo-random code generators
- Shift left register
- High-speed logic
- Meter applications
