banner_page

SN74ABT841ADBRE4

D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74ABT Series 74ABT841 24 Pins DUAL BICMOS 24-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ABT841ADBRE4
  • Package: 24-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 769
  • Description: D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74ABT Series 74ABT841 24 Pins DUAL BICMOS 24-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209, 5.30mm Width)
Number of Pins 24
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ABT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74ABT841
Pin Count 24
Qualification Status Not Qualified
Output Type Tri-State
Circuit 10:10
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Output Current 64mA
Number of Bits 10
Propagation Delay 5.5 ns
Turn On Delay Time 4.1 ns
Family ABT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 32mA 64mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 6.2 ns
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 38mA
Independent Circuits 1
Number of Output Lines 10
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2mm
Length 8.2mm
Width 5.3mm
Thickness 1.95mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ABT841ADBRE4 Overview


It is embedded in the 24-SSOP (0.209, 5.30mm Width) package. A package of Tape & Reel (TR) has been used. It uses Tri-State as its output configuration. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. The temperature at which the machine is operating is -40°C~85°C. The 74ABT series is associated with this FPGA. 10 Bits are used in the design of this electronic part. In this device, there are 24 terminations. 74ABT841 is its family. With the supply voltage set at 5V, it is able to operate. The device is equipped with 24 pins. In the world of electronics, this electronic device belongs to the family of ABT. The pin configuration of the device is 24. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. The part is in the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.5V. 5V power supplies are needed to operate it. (Vsup) should be greater than 4.5V. On the basis of its reliability, this device is well suited for TR. Due to its 64mA output current, it offers maximum design flexibility. There are 10 output lines that correspond to the binary equivalents of the input line. In order to operate properly, its maximum power current (ICC) should be 38mA.

SN74ABT841ADBRE4 Features


24-SSOP (0.209, 5.30mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
24 pins
5V power supplies

SN74ABT841ADBRE4 Applications


There are a lot of Texas Instruments SN74ABT841ADBRE4 Latches applications.

  • Parallel Input
  • Meter applications
  • Serial Output Register
  • Parallel data synchronization
  • General-Purpose Register
  • Flip-flops
  • Counter control
  • TV Set-top Boxes
  • PCs and Notebooks
  • Automotive Body Electronics

Write a review

Note: HTML is not translated!
    Bad           Good