SN74ABT841ADW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT841ADW Overview
In the 24-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ABT series of FPGAs is the one this FPGA belongs to. There are 10 bits in this electronic part. This device is designed with 24 terminations. As a member of the 74ABT841 family, it falls under that category. In order to function, the supply voltage should be set to 5V. It is equipped with 24 pin count. This electronic device belongs to the family of ABT. Designed with 24 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. There is 5V power supply for it. The output current of 64mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A binary equivalent of the input line is generated by the 3 output lines. Aquiescent current is consumed by 1μA without being affected by external forces. The element count is 1.
SN74ABT841ADW Features
24-SOIC (0.295, 7.50mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ABT841ADW Applications
There are a lot of Texas Instruments SN74ABT841ADW Latches applications.
- Motor Drives
- Relay replacement
- Frequency dividing
- Serial Output Register
- Parallel Input
- Network Switches
- Automotive ADAS
- Up/down difference counting
- Clocks
- Display driver
