SN74ABT841ADWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Power Supply Current-Max (ICC) | 38mA |
| Number of Input Lines | 10 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ABT841ADWRE4 Overview
In the SOIC package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). 10 Bits are used in the design of this electronic part. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With a supply voltage of 5V, it operates. The 24 pind are equipped with it. In terms of electronic devices, this one is in the ABT family. It is designed with 24 pins. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. A total of 5V power supplies are needed to run it. An electronic circuit can be found on 10 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. The maximal power current (ICC) supplied for its operation reaches 38mA. The low level output current is set to 32mA. 64mA is set as the high level output current. A temperature below 85°C should be used for operation. There should be a temperature above -40°C at which the device operates. There is a maximum supply voltage of 5.5V supported by this device. In order for the machine to operate, the supply voltage must be 4.5V. As far as the logic IC is concerned, it uses BUS DRIVER. Its output current of 64mA ensures maximum design flexibility.
SN74ABT841ADWRE4 Features
SOIC package
10 Bits
24 pin count
24 pins
5V power supplies
SN74ABT841ADWRE4 Applications
There are a lot of Texas Instruments SN74ABT841ADWRE4 Latches applications.
- Relay
- Parallel-to-Serial Data Conversion
- Automotive Body Electronics
- TV Set-top Boxes
- Automotive ADAS
- Automotive Cluster
- Lamp and Display (LED)
- Parallel Input
- Control circuits
- Up-Down Johnson
