SN74ABT841ANT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Number of Output Lines | 3 |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT841ANT Overview
There is an embedded version of it in package 24-DIP (0.300, 7.62mm). This package has the format of Tube. It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Electronic parts are mounted in accordance with Through Hole. The voltage supply is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74ABT series, this FPGA is located. With this electronic part, there are 10 bits. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74ABT841 family, it falls under that category. It operates with a supply voltage of 5V. With 24 pins, it is equipped. ABT is the family of this electronic device. With the design of the board, there are only 24 pins. Through Hole is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. The 64mA output current gives it maximum design flexibility. High efficiency requires a voltage supply of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As far as external factors are concerned, it consumes 1μA of quiescent current without getting affected by them. This element consists of 1.
SN74ABT841ANT Features
24-DIP (0.300, 7.62mm) package
74ABT series
10 Bits
74ABT841 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ABT841ANT Applications
There are a lot of Texas Instruments SN74ABT841ANT Latches applications.
- Bus system register with enable parallel lines at bus side
- Buffer register
- Display
- Programmable binary
- Hammer Device Information
- Shift left register
- A/D and D/A conversion
- High-speed logic
- Automotive Cluster
- Automotive ADAS
