SN74ABT841APW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 7.1 ns |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 38mA |
| Number of Output Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT841APW Overview
24-TSSOP (0.173, 4.40mm Width) contains it. As a result, it has a packaging of Tube. In its configuration, Tri-State is used as the output. A D-Type Transparent Latch logic type is used in this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. The 74ABT series contains FPGAs of this type. The design of this electronic part contains 10 bits. As far as this device is concerned, it has no terminations. 74ABT841 is the family name of it. In order to operate it, the supply voltage must be 5V. With 24 pins, it is equipped. It is a member of the ABT family of electronic devices. This board has 24 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. There are 5V power supplies attached to it. The output current of 64mA makes it feature maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. It follows that 10 output lines are generated from the binary equivalent of the input line. This object is composed of 1 elements. When the maximum power current (ICC) is supplied for its operation, it reaches 38mA.
SN74ABT841APW Features
24-TSSOP (0.173, 4.40mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ABT841APW Applications
There are a lot of Texas Instruments SN74ABT841APW Latches applications.
- Automotive Body Electronics
- Audio and video switching
- Serial Output Data Queuing
- Automotive HEV/EV Powertrain
- Multistage ripple counting
- Stacked or Push-Down Registers
- Buffer register
- Programmable binary
- Parallel data synchronization
- Relay replacement
