SN74ABT841APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 38mA |
| Turn On Delay Time | 4.1 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT841APWR Overview
In the 24-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Cut Tape (CT) is the way in which it is packaged. In this configuration, the output is set to Tri-State. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. The operating temperature is -40°C~85°C. It is a type of FPGA belonging to the 74ABT series. The electronic part in this image has 10 bits. This device is designed with 24 terminations. It is a member of the 74ABT841 family. In order to function, the supply voltage should be set to 5V. It has 24 pins that makes it easy to use. ABT is the family of this electronic device. Designed with 24 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. FF/Latches is the subcategory of this part. A total of 5V power supplies are required for it to operate. Based on its reliable performance, this device is appropriate for TR. The output current of 64mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. A binary equivalent of the input line is generated by the 3 output lines. It consumes 38mA of quiescent current without being affected by external factors. There are 1 elements in it.
SN74ABT841APWR Features
24-TSSOP (0.173, 4.40mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ABT841APWR Applications
There are a lot of Texas Instruments SN74ABT841APWR Latches applications.
- Meter applications
- Frequency
- Multi-line decoders
- Registers
- Network Switches
- Counting
- Four-bit storage with output enable
- Automotive Infotainment
- General-Purpose Register
- Counter
