SN74ABT843DBR
| Parameters | |
|---|---|
| Number of Bits | 9 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 24mA |
| Turn On Delay Time | 4.4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 7.2 ns |
| Number of Output Lines | 3 |
| Translation | N/A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT843 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
SN74ABT843DBR Overview
In the 24-SSOP (0.209, 5.30mm Width) package, it is embedded. Cut Tape (CT) is the way it is packaged. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Electronic parts are mounted in accordance with Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. During operation, the temperature is set at -40°C~85°C. It is a type of FPGA belonging to the 74ABT series. The electronic part in this image has 9 bits. A device with this design has 24 terminations. 74ABT843 is its family. With a supply voltage of 5V, it operates. 24 pins are included. It is part of the family of electronic devices called ABT. 24 pins are used in its design. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. Subcategory Bus Driver/Transceiver includes this part. A total of 5V power supplies are required for it to operate. The reliability of this device makes it well suited to TR. Due to its 64mA output current, it offers maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. It follows that 3 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 24mA quiescent current. The element count is 1.
SN74ABT843DBR Features
24-SSOP (0.209, 5.30mm Width) package
74ABT series
9 Bits
74ABT843 family
24 pin count
24 pins
5V power supplies
1 elements
SN74ABT843DBR Applications
There are a lot of Texas Instruments SN74ABT843DBR Latches applications.
- Relay
- Serial Output Data Queuing
- Storage
- Avionics
- Parallel Input
- Ring counter
- TV Set-top Boxes
- Data acquisition
- Shift Registers
- Counting
