SN74ABT843NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 307.790773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT843 |
| Pin Count | 24 |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 34mA |
| Number of Bits | 9 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 4.4 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 7.2 ns |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABT843NSRG4 Overview
The 24-SOIC (0.209, 5.30mm Width) package contains it. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. The 74ABT series contains FPGAs of this type. With this electronic part, there are 9 bits. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74ABT843 family. The device works with a voltage of 5V for its supply voltage. It is equipped with 24 pin count. This electronic device belongs to the family of ABT. In addition, it is designed with a pin number of 24. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. 5.5V is the maximum supply voltage (Vsup). The system is powered by 5V sources. (Vsup) should be greater than 4.5V. Based on its reliable performance, this device is well suited to TAPE AND REEL.
SN74ABT843NSRG4 Features
24-SOIC (0.209, 5.30mm Width) package
74ABT series
9 Bits
74ABT843 family
24 pin count
24 pins
5V power supplies
SN74ABT843NSRG4 Applications
There are a lot of Texas Instruments SN74ABT843NSRG4 Latches applications.
- Automatic test equipment
- Digital bus buffer
- Serial Output Data Queuing
- Shift Registers
- PCs and Notebooks
- Relay
- Pattern generators
- Data acquisition
- Address register
- Synchronous frequency dividers
