SN74ABTE16245DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABTE |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V~5.5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ABTE16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 90mA |
| Number of Bits | 16 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 38mA |
| Turn On Delay Time | 7.3 ns |
| Family | ABTE/ETL |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Incident-Wave Switching Bus Transceivers |
| Max I(ol) | 0.09 A |
| High Level Output Current | -60mA |
| Low Level Output Current | 90mA |
| Control Type | COMMON CONTROL |
| Schmitt Trigger | No |
| Translation | BTL & TTL |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABTE16245DLR Overview
A packaging method based on Tape & Reel (TR) is employed.A package called 48-BSSOP (0.295, 7.50mm Width) contains it.Providing a voltage of 4.5V~5.5V ensures proper function of the device.This electronic part is mounted by using the Surface Mount method.Temperature -40°C~85°C is set as operating temperature.Information can be stored in the memory at the rate of 16 bits.There are a number of similarities among the electronic parts of the 74ABTE series.Based on the 74ABTE16245 base part number, many related parts can be found.It adds up to 48 when all component pins are added together.48 terminations reduce the likelihood of signals reflecting off the end of a transmission line.This is mounted using the Surface Mount method.As part of its construction, it has 48 pins.A minimum supply voltage of 4.5V allows normal operation to be maintained.Keeping the maximum supply voltage at 5.5V will maintain normal operation.Its operation is dependent upon the supply voltage of 5V.The power supplies of 5V should be maintained for convenient use.An electronic part from the ABTE/ETL family is optimized for reliable performance and high quality.In total, it contains 2 ports.As part of its packing process, it uses TR.COMMON CONTROL serves as its control type.2 circuits are configured on it.No external factors affect its consumption of 38mA current.During operation, 90mA is provided as the output current.
SN74ABTE16245DLR Features
SN74ABTE16245DLR Applications
There are a lot of Texas Instruments SN74ABTE16245DLR Specialty Logic ICs applications.
- Metro access rings
- Remote controls
- Lamps
- Car radio
- Indoor ad hoc meeting
- Cell phones
- Satellite radio receiver
- SONET/SDH Network
- Wireless smart house
- Solenoids
