SN74ABTH162260DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ABTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Logic ICs |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ABTH162260 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 12:24 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 3 |
| Output Current | 64mA |
| Number of Bits | 12 |
| Propagation Delay | 6.4 ns |
| Turn On Delay Time | 3.6 ns |
| Family | ABT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 63mA |
| Number of Output Lines | 24 |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABTH162260DL Overview
The package in which it is embedded is named 56-BSSOP (0.295, 7.50mm Width). A Tube package is used to package it. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. It is -40°C~85°C at the operating temperature. In the 74ABTH series, this FPGA is located. 12 Bits are used in the design of this electronic part. This device is designed with 56 terminations. The family 74ABTH162260 includes it. The device is operated when the supply voltage is set to 5V. The 56 pind are equipped with it. In terms of electronic devices, this one is in the ABT family. There are 56 pins on it. Surface Mount is the way in which this electronic part is mounted. This device has a total of 3 ports. The part belongs to the Other Logic ICs subcategory. The system is powered by 5V sources. With an output current of 64mA, it is highly flexible in terms of design. High efficiency requires a voltage supply of 5V. Input lines are converted into binary equivalents by 24 output lines. A total of 1 elements are contained in it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 63mA.
SN74ABTH162260DL Features
56-BSSOP (0.295, 7.50mm Width) package
74ABTH series
12 Bits
74ABTH162260 family
56 pin count
56 pins
5V power supplies
1 elements
SN74ABTH162260DL Applications
There are a lot of Texas Instruments SN74ABTH162260DL Latches applications.
- Relay
- Pattern Generators
- Parallel Output
- Meter applications
- Stacked or Push-Down Registers
- Pseudo-random code generators
- Shift right register
- Parallel Input
- General-Purpose Register
- Automotive Cluster
