SN74ABTH162460DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABTH162460 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 5 |
| Number of Bits | 4 |
| Propagation Delay | 6.9 ns |
| Family | ABT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 32mA 64mA; 12mA 12mA |
| Supply Type | Single |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.5 ns |
| Power Supply Current-Max (ICC) | 32mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.79mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ABTH162460DLR Overview
Digital switch is provided in the 56-BSSOP (0.295, 7.50mm Width) for the purpose of saving board space.As a result, it is packaged in the way of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Multiplexer/Demultiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74ABTH series are suitable for a wide range of applications.There is a design for terminating 56 as part of its basic configuration.The base part number is 74ABTH162460, so you can find its logic switch related parts using that number.In multiplexer's system, 5V is the voltage supplied.This turn signal switch has 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.There are 56 pins on it.The mount is in Surface Mount.The logic switch is a member of the ABT family.In the signal multiplexer, there are 4 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4.5V to avoid some unnecessary failures.To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.In order for 5V to operate normally, a power supply is provided.The switches packaging is based on TAPE AND REEL.The signal switching operates with a resistance of 5.
SN74ABTH162460DLR Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
SN74ABTH162460DLR Applications
There are a lot of Texas Instruments SN74ABTH162460DLR Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- PCIe
- Transmission from the computer system of a satellite
- Image transmission
- Night vision cameras
- Telephone network
- Make full adder
- Automatic health monitoring systems
- Combinational circuit
- Encrypted communications system
