SN74ABTH16823DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABTH16823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 5.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ABTH16823DL Overview
As a result, it is packaged as 56-BSSOP (0.295, 7.50mm Width). A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74ABTH series. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 1 elements. Despite external influences, it consumes 500μAof quiescent current. Terminations are 56. If you search by 74ABTH16823, you will find similar parts. Power is provided by a 5V supply. Its input capacitance is 4pFfarads. ABTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. A total of 56pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 18bits. The superior flexibility of this circuit is achieved by using 2 circuits. The system runs on a power supply of 5V watts. A total of 2ports are embedded in the D flip flop. For high efficiency, the supply voltage should be kept at 5V. It is designed with 3 output lines. It is also characterized by WITH CLEAR AND CLOCK ENABLE.
SN74ABTH16823DL Features
Tube package
74ABTH series
56 pins
18 Bits
5V power supplies
SN74ABTH16823DL Applications
There are a lot of Texas Instruments SN74ABTH16823DL Flip Flops applications.
- ESD protection
- Frequency Dividers
- Data storage
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Patented noise
- Instrumentation
- Modulo – n – counter
- Counters
- Matched Rise and Fall
