SN74ABTH16823DLR
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABTH16823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 18 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 5.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ABTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
SN74ABTH16823DLR Overview
The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. The package Cut Tape (CT)contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74ABTHseries contain this type of chip. You should not exceed 150MHzin its output frequency. D latch consists of 2 elements. This process consumes 500μA quiescents. Currently, there are 56 terminations. The 74ABTH16823family includes it. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 4pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the ABTfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. There are 56pins on it. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. The design is based on 18bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It operates from 5V power supplies. The flip flop has 2ports embedded within it. For high efficiency, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. There are 3 output lines on it. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74ABTH16823DLR Features
Cut Tape (CT) package
74ABTH series
56 pins
18 Bits
5V power supplies
SN74ABTH16823DLR Applications
There are a lot of Texas Instruments SN74ABTH16823DLR Flip Flops applications.
- Buffer registers
- Latch-up performance
- Automotive
- Storage Registers
- Instrumentation
- Convert a momentary switch to a toggle switch
- Safety Clamp
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- Power down protection
