SN74ABTH18504APMR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABTH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABTH18504 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 20-Bit |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 20 |
| Family | ABT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Scan Test Universal Bus Transceiver |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 5.5 ns |
| Propagation Delay (tpd) | 5.5 ns |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 27mA |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
SN74ABTH18504APMR Overview
Embedded in the 64-LQFP package, it is used by many applications. Tape & Reel (TR) is the way it is packaged. In order to achieve this superior flexibility, 20-Bit circuits are used. As far as the logic type of this electrical device is concerned, it is Scan Test Universal Bus Transceiver. A Surface Mount-shaped electronic component is mounted here. It is better to have an operating temperature higher than -40°C~85°C. High/Low output currents allow 32mA 64mA to have a maximum design flexibility. A 74ABTH series FPGA is a type of FPGA that is part of the family of FPGAs. It operates with a supply voltage of 4.5V~5.5V. 74ABTH18504 family is the family in which it belongs. There is one type of termination that is called the 64 termination, which consists in terminating a transmission line with a device that has an impedance that matches the characteristic impedance of the line itself. Normal operation requires an output voltage above 5V. 64 pins are present in the device. The electronic part was designed using 20 Bits. An example of this is through the use of 2 terminations, where a particular device is used to end a transmission line with an impedance matching device, fitted with its characteristic impedance. In this case, the electronic part will be mounted in the Surface Mount-direction. The 64 pins are designed to be a part of it. In the family of ABT devices, this electronic device belongs. When Vsup reaches 5.5V, the maximum supply voltage has been reached. It is necessary to have a greater supply voltage (Vsup) than 4.5V in order to operate correctly. Powered by 5V batteries, it operates on a 12V system. The reliability of this device makes it well suited for TAPE AND REEL as a result of its proven reliability. The second characteristic that it has is WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; WITH CLOCK ENABLE.
SN74ABTH18504APMR Features
64-LQFP package
74ABTH series
74ABTH18504 family
64 pin count
64 pins
5V power supplies
SN74ABTH18504APMR Applications
There are a lot of Texas Instruments SN74ABTH18504APMR Universal Bus Functions applications.
- Flip flops
- Small ground power station
- Range hood
- Computer
- Electric grinding wheel
- Electrical tools
- Electric shaver
- Overcurrent/Short circuit protection
- VCR
- Automatic watering system
