SN74AC373DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC373DBR Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. This package has the format of Cut Tape (CT). Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 2V~6V. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. A device with this design has 20 terminations. This type belongs to the 74AC373 family. The device is operated when the supply voltage is set to 3.3V. It is equipped with 20 pin count. It is a member of the AC family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports. Subcategory FF/Latches contains this part. During this period, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is well suited to TR. The output current of 24mA makes it feature maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. To achieve its exceptional flexibility, it relies on 8 circuits. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AC373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
SN74AC373DBR Applications
There are a lot of Texas Instruments SN74AC373DBR Latches applications.
- Watches
- Counter
- Parallel Output
- Avionics
- Double bus register system
- Buffer/Storage Registers
- Up-Down Johnson
- Automotive Cluster
- Hammer Device Information
- Parallel data storage
