banner_page

SN74AC373DW

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC373DW
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 763
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Independent Circuits 1
Number of Output Lines 3
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 74AC373
Pin Count 20
Output Type Tri-State
Max Output Current 24mA
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 15 ns
Turn On Delay Time 7.5 ns
Family AC
Logic Function D-Type, Latch

SN74AC373DW Overview


It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Tube is the way it is packaged. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A voltage of 2V~6V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. A device with this design has 20 terminations. 74AC373 is the family name of it. The device works with a voltage of 3.3V for its supply voltage. It has 20 pins that makes it easy to use. It is part of the family of electronic devices called AC. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. This part is included in FF/Latches. Vsup reaches 6V as the maximum supply voltage. A voltage greater than 2V must be supplied as a power supply (Vsup). The 24mA output current gives it maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. To achieve its exceptional flexibility, it relies on 8 circuits. Maximum power supply (ICC) for its operation is 0.04mA.

SN74AC373DW Features


20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins

SN74AC373DW Applications


There are a lot of Texas Instruments SN74AC373DW Latches applications.

  • Watches
  • Digital bus buffer
  • Ring counter
  • Display driver
  • Stacked or Push-Down Registers
  • Counter control
  • Relay
  • High-speed logic
  • Double bus register system
  • PCs and Notebooks

Write a review

Note: HTML is not translated!
    Bad           Good