SN74AC373DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC373DWG4 Overview
There is an embedded version of it in package SOIC. This package has the format of Rail/Tube. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The supply voltage of the device is 3.3V. 20 pins are provided. There is a device in this electronic family called AC. The 20 pins are designed into it. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. The device is powered by 3.3/5V power supplies. 8 circuits are used to provide this superior level of flexibility. 24mA is the low level output current. It has been set to -24mA for the high level output current. Ideally, the operating temperature should be lower than 85°C. It is recommended to operate at a temperature higher than -40°C. Voltages up to 6V can be supplied. A minimal voltage of 2V is needed to operate it. It uses the logic IC BUS DRIVER. Its 24mA output current allows for maximum design flexibility.
SN74AC373DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC373DWG4 Applications
There are a lot of Texas Instruments SN74AC373DWG4 Latches applications.
- Avionics
- Automotive HEV/EV Powertrain
- Serial Output Data Queuing
- Pattern Generators
- Automotive Infotainment
- OC-48 communication systems
- Clocks
- Pseudo-random code generators
- General-Purpose Register
- Synchronous frequency dividers
