SN74AC373DWR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74AC373DWR Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. Packaged in the way of Cut Tape (CT). It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. There are a number of FPGAs in this series, including this one. This electronic part is designed with 8 Bits. In this device, there are 20 terminations. It is a member of the 74AC373 family. The device works with a voltage of 3.3V for its supply voltage. There are 20 pins attached to it. In terms of electronic devices, this one is in the AC family. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. In this device, there is a total of 2 ports available for use. FF/Latches is the subcategory of this part. During this period, the maximum supply voltage (Vsup) reaches 6V. It is recommended to have a higher supply voltage (Vsup) than 2V. This device is well suited for TR based on its reliable performance. The output current of 24mA makes it feature maximum design flexibility. Input lines are converted into binary equivalents by 3 output lines. There are no external factors that affect it, so it consumes 4μA quiescent current. Its superior flexibility is achieved by using 8 circuits. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.
SN74AC373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
SN74AC373DWR Applications
There are a lot of Texas Instruments SN74AC373DWR Latches applications.
- Shift Registers
- Frequency
- Automotive Infotainment
- Decade counting
- PCs and Notebooks
- Watches
- Digital bus buffer
- Parallel Input
- Registers
- Decade counting 7-segment decimal display
