SN74AC373DWRG4
| Parameters | |
|---|---|
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
SN74AC373DWRG4 Overview
The SOIC package contains it. Tape and Reel is the packaging method. It is designed with 8 bits. This device has been designed with 20 terminations available. The device works with a voltage of 3.3V for its supply voltage. With 20 pins, it is equipped. This electronic device belongs to the family of AC. The device has 20 pins. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. A total of 3.3/5V power supplies are needed to run it. The superior flexibility of the system is achieved through its use of 8 circuits. There is 32mA low level output current set. The high level output current is set to -24mA. There should be a temperature below 85°C at which the system is operating. The operating temperature should be higher than -40°C. There is a maximum voltage of 6V supported. With a voltage of 2V, it operates at its minimum capacity. The logic IC it adopts is BUS DRIVER. Due to its 24mA output current, it offers maximum design flexibility.
SN74AC373DWRG4 Features
SOIC package
8 Bits
20 pin count
20 pins
3.3/5V power supplies
SN74AC373DWRG4 Applications
There are a lot of Texas Instruments SN74AC373DWRG4 Latches applications.
- A/D and D/A conversion
- Decade counting
- Serial Input
- Accumulator Registers
- Serial Output Register
- Hammer Device Information
- General-Purpose Register
- Parallel-to-Serial Data Conversion
- Parallel Output
- Decade counting 7-segment decimal display
