banner_page

SN74AC373MDWREP

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC373MDWREP
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 126
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 74AC373
Pin Count 20
Output Type Tri-State
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 16.5 ns
Turn On Delay Time 7.5 ns
Family AC
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW/HIGH
Number of Output Lines 8
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AC373MDWREP Overview


The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). As a result, it has a packaging of Tape & Reel (TR). In its configuration, Tri-State is used as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. A 2V~6V supply voltage is required to operate it. It operates at -55°C~125°C degrees Celsius. It is a type of FPGA belonging to the 74AC series. With this electronic part, there are 8 bits. A device with this design has 20 terminations. The family 74AC373 includes it. The supply voltage of the device is 3.3V. It has 20 pins that makes it easy to use. AC is the family of this electronic device. The pin configuration of the device is 20. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. When Vsup reaches 6V, the maximal supply voltage is reached. It operates from 3.3/5V power supplies. There should be a voltage supply (Vsup) greater than 2V. On the basis of its reliability, this device is well suited for TR. With an output current of 24mA, it is highly flexible in terms of design. 8 output lines provide binary equivalents of input lines. It consists of 1 elements.

SN74AC373MDWREP Features


20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
3.3/5V power supplies
1 elements

SN74AC373MDWREP Applications


There are a lot of Texas Instruments SN74AC373MDWREP Latches applications.

  • Watches
  • Data acquisition
  • Shift left register
  • Serial Output Data Queuing
  • Display driver
  • Parallel-to-Serial Data Conversion
  • Clocks
  • Up/down difference counting
  • Phase comparator
  • Multi-line decoders

Write a review

Note: HTML is not translated!
    Bad           Good