banner_page

SN74AC373N

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 316
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Weight 1.1991g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 2.54mm
Base Part Number 74AC373
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 2V
Number of Circuits 8
Operating Supply Current 4μA
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 15 ns
Quiescent Current 4μA
Turn On Delay Time 7.5 ns
Family AC
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AC373N Overview


The 20-DIP (0.300, 7.62mm) package contains it. Tube is the packaging method. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74AC series. There are 8 bits in this electronic part. A device with this design has 20 terminations. 74AC373 is the family name of it. In order to function, the supply voltage should be set to 3.3V. It has 20 pins that makes it easy to use. AC is the family name of this electronic device. The 20 pins are designed into it. The electronic part is mounted using the Through Hole method. This device is equipped with 2 ports. Subcategory FF/Latches includes this part. When Vsup reaches 6V, the maximal supply voltage is reached. The device is powered by 3.3/5V power supplies. A supply voltage (Vsup) greater than 2V is required. Its output current of 24mA ensures maximum design flexibility. Aquiescent current is consumed by 4μA without being affected by external forces. Its superior flexibility is achieved by using 8 circuits. In order to operate properly, its maximum power current (ICC) should be 0.04mA.

SN74AC373N Features


20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
3.3/5V power supplies

SN74AC373N Applications


There are a lot of Texas Instruments SN74AC373N Latches applications.

  • Data acquisition
  • Pseudo-random code generators
  • Watches
  • Storage
  • Counter timers
  • Audio and video switching
  • Pattern Generators
  • Parallel-to-Serial Data Conversion
  • Network Switches
  • Registers

Write a review

Note: HTML is not translated!
    Bad           Good