Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.209, 5.30mm Width) |
Number of Pins |
20 |
Weight |
266.712314mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74AC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
74AC373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
15 ns |
Turn On Delay Time |
7.5 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Height |
2mm |
Length |
12.6mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AC373NSR Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. The package is in the form of Cut Tape (CT). It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The voltage supply is 2V~6V. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. A device with this design has 20 terminations. The family 74AC373 includes it. A 3.3V voltage supply is required for operation. The device is equipped with 20 pins. In terms of electronic devices, this one is in the AC family. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device has 2 ports. Subcategory FF/Latches includes this part. 6V is the maximum supply voltage (Vsup). (Vsup) should be greater than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. On the basis of its reliability, this device is well suited for TR. With 24mA, maximum design flexibility is ensured. Input lines are converted into binary equivalents by 3 output lines. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.
SN74AC373NSR Features
20-SOIC (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
SN74AC373NSR Applications
There are a lot of Texas Instruments SN74AC373NSR Latches applications.
- Ring counter
- Shift Registers
- Buffer/Storage Registers
- Parallel data storage
- High-speed logic
- Relay
- Pattern Generators
- Registers
- Clocks
- Stacked or Push-Down Registers