SN74AC373PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 7.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC373PW Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Tube is the way it is packaged. Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 2V~6V, it operates. During operation, the temperature is set at -40°C~85°C. It is a type of FPGA belonging to the 74AC series. This electronic part is designed with 8 Bits. This device has 20 terminations. 74AC373 is the family name of it. The device is operated when the supply voltage is set to 3.3V. It has 20 pins that makes it easy to use. This electronic device is categorized as a AC electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. The maximal supply voltage (Vsup) reaches 6V. There are 3.3/5V power supplies required for this machine to operate. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. It contains 8 input lines where electronic circuits are present. As the output current is 24mA, the design flexibility is maximum. In order to operate properly, its maximum power current (ICC) should be 0.04mA.
SN74AC373PW Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC373PW Applications
There are a lot of Texas Instruments SN74AC373PW Latches applications.
- Parallel data storage
- Automatic test equipment
- Network Switches
- Frequency dividing
- Relay
- Watches
- Parallel Input
- Parallel Output
- Shift register
- Meter applications
