banner_page

SN74AC373PWRG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC373PWRG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 580
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Pin Count 20
Polarity Non-Inverting
Power Supplies 3.3/5V
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 15 ns
Turn On Delay Time 7.5 ns
Family AC
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -24mA
Low Level Output Current 24mA
Independent Circuits 1
Height 1.15mm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74AC373PWRG4 Overview


In the package TSSOP, it can be found. A package of Tape and Reel has been used. The design of this electronic part contains 8 bits. A device such as this has 20 terminations designed. A 3.3V voltage supply is required for operation. With 20 pins, it is equipped. There is a device in this electronic family called AC. The 20 pins are designed into it. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. 3.3/5V power supplies are needed to operate it. 8 circuits enable it to achieve high performance. The low level output current is set to 24mA. In the high level output current, the value is set to -24mA. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used for operation. There is a maximum supply voltage of 6V supported by this device. The minimal supply voltage is 2V. A logic IC that is used in this application is BUS DRIVER. The output current of this device is 24mA, which makes it a very flexible design element.

SN74AC373PWRG4 Features


TSSOP package
8 Bits
20 pin count
20 pins
3.3/5V power supplies

SN74AC373PWRG4 Applications


There are a lot of Texas Instruments SN74AC373PWRG4 Latches applications.

  • Pseudo-random code generators
  • Registers
  • TV Set-top Boxes
  • Up/down difference counting
  • Storage
  • Counters
  • Audio and video switching
  • A/D and D/A conversion
  • Hammer Device Information
  • Automotive Cluster

Write a review

Note: HTML is not translated!
    Bad           Good