SN74AC374DWG4
| Parameters | |
|---|---|
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 155MHz |
| Pin Count | 20 |
| Number of Elements | 1 |
SN74AC374DWG4 Overview
It is embeded in SOIC case. There are 1 elements in it. A total of 20 terminations have been made. A voltage of 3.3V provides power to the D latch. In this case, the D flip flop belongs to the ACfamily. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It operates from 3.3/5V power supplies. The flip flop has 2ports embedded within it. There is -24mA output current at the high level. The low level output current is set to 24mA. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. It is powered by 2V as its minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. This can be achieved at a frequency of 155MHz. BUS DRIVERis used as the logic IC in this D flip flop. A total of 1 functions are available on the T flip flop. It is equipped with 20 pin count. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.
SN74AC374DWG4 Features
20 pins
3.3/5V power supplies
1 Functions
20 pin count
SN74AC374DWG4 Applications
There are a lot of Texas Instruments SN74AC374DWG4 Flip Flops applications.
- Automotive
- Single Up Count-Control Line
- Balanced Propagation Delays
- Dynamic threshold performance
- Data Synchronizers
- Reduced system switching noise
- ESD performance
- ATE
- Frequency Divider circuits
- Balanced 24 mA output drivers
