SN74AC374DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 155MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AC374DWRG4 Overview
It is embeded in SOIC case. It is included in the package Tape & Reel (TR). D latch consists of 1 elements. Currently, there are 20 terminations. The power source is powered by 3.3V. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The D latch operates on 3.3/5V volts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level output current of -24mAis set. It is set to 24mAfor the low level output current. It is recommended that the operating temperature be lower than 85°C. If the operating temperature is higher than -40°C, the system should operate properly. Initially, it requires a voltage of 2V as the minimum supply voltage. 6Vis its maximum supply voltage. A frequency of 155MHzcan be achieved. This logic IC is BUS DRIVER. Currently, it is equipped with 1 functions . With 20 pins, it is equipped with a low power consumption. It features maximum design flexibility due to the 24mA output current.
SN74AC374DWRG4 Features
Tape & Reel (TR) package
20 pins
3.3/5V power supplies
1 Functions
20 pin count
SN74AC374DWRG4 Applications
There are a lot of Texas Instruments SN74AC374DWRG4 Flip Flops applications.
- Communications
- Memory
- Control circuits
- Modulo – n – counter
- Differential Individual
- Single Up Count-Control Line
- Load Control
- Buffer registers
- Data Synchronizers
- ESD protection
