SN74AC374NSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC374NSRE4 Overview
It is embeded in 20-SOIC (0.209, 5.30mm Width) case. There is an embedded version in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 155MHzin the output frequency of the device. The element count is 1 . It consumes 4μA of quiescent 20terminations have occurred. The 74AC374 family contains this object. A voltage of 3.3V provides power to the D latch. Its input capacitance is 4.5pFfarads. An electronic device belonging to the family ACcan be found here. There is an electronic component mounted in the way of Surface Mount. This board is designed with 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This RS flip flops is a part number FF/Latches. There are 8bits in this flip flop. It reaches the maximum supply voltage (Vsup) at 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Its flexibility is enhanced by 8 circuits. This D flip flop is well suited for TR based on its reliable performance. This flip flop has a total of 2ports. Its output current of 24mAallows for maximum design flexibility. As of now, there are 3input lines.
SN74AC374NSRE4 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
SN74AC374NSRE4 Applications
There are a lot of Texas Instruments SN74AC374NSRE4 Flip Flops applications.
- Consumer
- Individual Asynchronous Resets
- CMOS Process
- Dynamic threshold performance
- Load Control
- Functionally equivalent to the MC10/100EL29
- Shift Registers
- Storage registers
- Instrumentation
- Matched Rise and Fall
