SN74AC374PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC374PWR Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). The package Cut Tape (CT)contains it. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74AC series. In order for it to function properly, its output frequency should not exceed 155MHz. D latch consists of 1 elements. It consumes 4μA of quiescent A total of 20 terminations have been made. You can search similar parts based on 74AC374. A voltage of 3.3V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. In this case, the D flip flop belongs to the ACfamily. This electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. Vsup reaches its maximum value at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The superior flexibility of this product is achieved by using 8 circuits. Considering its reliability, this T flip flop is well suited for TR. The D flip flop has no ports embedded. With an output current of 24mA, it is possible to design the device in any way you want. This input has 3lines in it.
SN74AC374PWR Features
Cut Tape (CT) package
74AC series
20 pins
8 Bits
SN74AC374PWR Applications
There are a lot of Texas Instruments SN74AC374PWR Flip Flops applications.
- Matched Rise and Fall
- Storage Registers
- Pattern generators
- Memory
- Cold spare funcion
- Parallel data storage
- Dynamic threshold performance
- ESD protection
- Balanced Propagation Delays
- Frequency Divider circuits
