SN74AC533DBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AC533DBR Overview
There is an embedded version of it in package 20-SSOP (0.209, 5.30mm Width). A package of Cut Tape (CT) has been used. In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The voltage supply is 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. The 74AC series contains FPGAs of this type. There are 8 bits in this electronic part. In this device, there are 20 terminations. As a member of the 74AC533 family, it falls under that category. The supply voltage of the device is 3.3V. The 20 pind are equipped with it. AC is the family of this electronic device. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. During this period, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be greater than 2V. It consists of 3 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is suitable for TAPE AND REEL. Its output current of 24mA ensures maximum design flexibility.
SN74AC533DBR Features
20-SSOP (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
SN74AC533DBR Applications
There are a lot of Texas Instruments SN74AC533DBR Latches applications.
- Counter control
- Audio and video switching
- Display driver
- Data acquisition
- Motor Drives
- Parallel data storage
- Parallel Output
- General-Purpose Register
- Hammer
- Control circuits
