SN74AC533DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AC533DBRE4 Overview
In the package 20-SSOP (0.209, 5.30mm Width), it can be found. A Tape & Reel (TR) package is used to package it. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. In the 74AC series, this FPGA is located. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The family 74AC533 includes it. With the supply voltage set at 3.3V, it is able to operate. 20 pins are available on it. In the world of electronics, this electronic device belongs to the family of AC. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. There are 3.3/5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. Input Lines consist of electronic circuits, and there are 8. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. The output current of 24mA makes it feature maximum design flexibility.
SN74AC533DBRE4 Features
20-SSOP (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC533DBRE4 Applications
There are a lot of Texas Instruments SN74AC533DBRE4 Latches applications.
- Decade counting 7-segment decimal display
- Shift right with parallel loading
- BCD counting
- Lamp and Display (LED)
- Automotive HEV/EV Powertrain
- Registers
- High-speed logic
- Serial Input
- Parallel Input
- Counter timers
