banner_page

SN74AC533DWR

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC533 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC533DWR
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 920
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC533 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 74AC533
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Inverting
Supply Voltage-Max (Vsup) 6V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 10 ns
Turn On Delay Time 2 ns
Family AC
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Number of Input Lines 8
Independent Circuits 1
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

SN74AC533DWR Overview


Package 20-SOIC (0.295, 7.50mm Width) includes it. Tape & Reel (TR) is the packaging method. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. In the 74AC series, this FPGA is located. An electronic part with 8 bits is designed. The device consists of 20 terminations that are designed to be used in conjunction with it. It belongs to 74AC533 family. The supply voltage of the device is 3.3V. With 20 pins, it is equipped. AC is the family of this electronic device. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. This part is included in FF/Latches. Vsup reaches 6V as the maximum supply voltage. The system is powered by 3.3/5V sources. (Vsup) should be greater than 2V. Input Lines consist of electronic circuits, and there are 8. On the basis of its reliability, this device is well suited for TAPE AND REEL. Due to its 24mA output current, it offers maximum design flexibility.

SN74AC533DWR Features


20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies

SN74AC533DWR Applications


There are a lot of Texas Instruments SN74AC533DWR Latches applications.

  • Up/down difference counting
  • Automotive HEV/EV Powertrain
  • Counter timers
  • TV Set-top Boxes
  • Relay replacement
  • Shift left with parallel loading
  • Frequency dividing
  • Up-Down Johnson
  • Accumulator Registers
  • Address register

Write a review

Note: HTML is not translated!
    Bad           Good