SN74AC533NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC533 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AC533NSRG4 Overview
There is an embedded version of it in package 20-SOIC (0.209, 5.30mm Width). Packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 2V~6V supply voltage is required to operate it. The operating temperature is -40°C~85°C. In the 74AC series, this FPGA is located. There are 8 bits in this electronic part. A device such as this has 20 terminations designed. The family 74AC533 includes it. The device works with a voltage of 3.3V for its supply voltage. It is equipped with 20 pin count. AC is the family of this electronic device. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. The device is powered by 3.3/5V power supplies. A voltage greater than 2V must be supplied as a power supply (Vsup). It contains 8 input lines where electronic circuits are present. On the basis of its reliability, this device is well suited for TAPE AND REEL. It features maximum flexibility in design due to 24mA output current.
SN74AC533NSRG4 Features
20-SOIC (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC533NSRG4 Applications
There are a lot of Texas Instruments SN74AC533NSRG4 Latches applications.
- Parallel data storage
- Multi-line decoders
- Synchronous frequency dividers
- Ring counter
- Lamp and Display (LED)
- Shift Registers
- Sample and hold register
- Parallel Input
- Pseudo-random code generators
- Hammer Device Information
