Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Weight |
76.997305mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AC |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74AC533 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
3.3/5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
10 ns |
Turn On Delay Time |
2 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74AC533PWE4 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). A package of Tube has been used. It uses the output configuration Tri-State. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. A 2V~6V voltage supply is required for operation. The temperature at which the machine is operating is -40°C~85°C. This FPGA is part of the 74AC series. There are 8 bits in this electronic part. This device is designed with 20 terminations. The family 74AC533 includes it. In order to function, the supply voltage should be set to 3.3V. 20 pins are included. This electronic device is categorized as a AC electronic device. 20 pins are used in its design. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. There is a maximum voltage supply (Vsup) that reaches 6V. There is 3.3/5V power supply for it. It is recommended that the supply voltage (Vsup) be greater than 2V. There are electronic circuits attached to the 8 input lines. Its output current of 24mA ensures maximum design flexibility.
SN74AC533PWE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC533PWE4 Applications
There are a lot of Texas Instruments SN74AC533PWE4 Latches applications.
- Automatic test equipment
- Shift Registers
- Shift left with parallel loading
- Counters
- Phase comparator
- Programmable binary
- Storage
- Meter applications
- Parallel data storage
- Accumulator Registers