SN74AC534N
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC534 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74AC534N Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. Package Tubeembeds it. The output it is configured with uses Tri-State, Inverted. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Through Hole. Powered by a 2V~6Vvolt supply, it operates as follows. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74AC series. It should not exceed 150MHzin its output frequency. The element count is 1 . This process consumes 4μA quiescents. Currently, there are 20 terminations. It is a member of the 74AC534 family. The power source is powered by 3.3V. JK flip flop input capacitance is 4.5pF farads. An electronic device belonging to the family ACcan be found here. Through Hole mounts this electronic component. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 8. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. Using 8 circuits, it is highly flexible. This D flip flop is equipped with 0 ports. The output current of 24mA makes it feature maximum design flexibility. The number of input lines is 3.
SN74AC534N Features
Tube package
74AC series
20 pins
8 Bits
SN74AC534N Applications
There are a lot of Texas Instruments SN74AC534N Flip Flops applications.
- Frequency Dividers
- Latch-up performance
- Data transfer
- EMI reduction circuitry
- ESCC
- Modulo – n – counter
- Load Control
- Counters
- Clock pulse
- ESD performance
