SN74AC534PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AC534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Max Output Current | 24mA |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC534PW Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The Tubepackage contains it. Tri-State, Invertedis the output configured for it. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. A 2V~6Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. The 74ACseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 150MHz. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74AC534. Power is supplied from a voltage of 3.3V volts. There is 4.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of AC. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 8bits. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. This D flip flop is equipped with 0 ports. The output current of 24mA makes it feature maximum design flexibility. Currently, there are 3 input lines present.
SN74AC534PW Features
Tube package
74AC series
20 pins
8 Bits
SN74AC534PW Applications
There are a lot of Texas Instruments SN74AC534PW Flip Flops applications.
- Parallel data storage
- Convert a momentary switch to a toggle switch
- ESD performance
- Computers
- Asynchronous counter
- High Performance Logic for test systems
- Shift Registers
- Common Clocks
- Bus hold
- Latch
