SN74AC534PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC534 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC534PWR Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Cut Tape (CT)package. It is configured with Tri-State, Invertedas an output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74AC series. A frequency of 150MHzshould be the maximum output frequency. In total, there are 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74AC534. The power source is powered by 3.3V. JK flip flop input capacitance is 4.5pF farads. A device of this type belongs to the family of AC. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 8. Vsup reaches 6V, the maximal supply voltage. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Its flexibility is enhanced by 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. The flip flop has 2ports embedded within it. With a current output of 24mA , it offers maximum design flexibility. 3input lines are available for you to choose from.
SN74AC534PWR Features
Cut Tape (CT) package
74AC series
20 pins
8 Bits
SN74AC534PWR Applications
There are a lot of Texas Instruments SN74AC534PWR Flip Flops applications.
- Balanced 24 mA output drivers
- Count Modes
- Pattern generators
- High Performance Logic for test systems
- Frequency Divider circuits
- Registers
- Test & Measurement
- Buffered Clock
- Shift Registers
- Balanced Propagation Delays
