banner_page

SN74AC563DBR

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC563 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AC563DBR
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 993
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC563 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74AC
JESD-609 Code e4
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number 74AC563
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 15 ns
Turn On Delay Time 4.6 ns
Family AC
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW/HIGH
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2mm
Length 7.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AC563DBR Overview


It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. A package of Cut Tape (CT) has been used. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. The supply voltage of the device is 2V~6V. There is a temperature of -40°C~85°C at which the system operates. The 74AC series contains FPGAs of this type. There are 8 bits in this electronic part. This device is designed with 20 terminations. 74AC563 is its family. The device is operated when the supply voltage is set to 3.3V. The device is equipped with 20 pins. It is a member of the AC family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. When Vsup reaches 6V, the maximal supply voltage is reached. (Vsup) should be greater than 2V. There are electronic circuits attached to the 3 input lines. Its reliable performance makes it an excellent choice for TR. With 24mA, maximum design flexibility is ensured.

SN74AC563DBR Features


20-SSOP (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins

SN74AC563DBR Applications


There are a lot of Texas Instruments SN74AC563DBR Latches applications.

  • Shift right with parallel loading
  • Parallel data synchronization
  • PCs and Notebooks
  • Buffer Storage
  • Display driver
  • Buffer/Storage Registers
  • Counter
  • Automotive ADAS
  • Automotive Body Electronics
  • Double bus register system

Write a review

Note: HTML is not translated!
    Bad           Good