Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
BROADSIDE VERSION OF 533 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
2.54mm |
Frequency |
1MHz |
Base Part Number |
74AC563 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
3.3/5V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
15 ns |
Turn On Delay Time |
4.6 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW/HIGH |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AC563N Overview
Package 20-DIP (0.300, 7.62mm) includes it. This package has the format of Tube. There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Through Hole method. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. It is a type of FPGA belonging to the 74AC series. It is designed with 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74AC563 family, it falls under that category. It operates with a supply voltage of 3.3V. With 20 pins, it is equipped. In terms of electronic devices, this one is in the AC family. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Through Hole method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches includes this part. There is a maximum voltage supply (Vsup) that reaches 6V. There are 3.3/5V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 2V. An electronic circuit can be found on 8 input lines. Due to its 24mA output current, it offers maximum design flexibility. There are also other characteristics of it, such as BROADSIDE VERSION OF 533.
SN74AC563N Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC563N Applications
There are a lot of Texas Instruments SN74AC563N Latches applications.
- Parallel Output
- Display
- Automotive Cluster
- Flip-flops
- Stacked or Push-Down Registers
- Sample and hold register
- Shift left register
- Shift left with parallel loading
- Audio and video switching
- Digital bus buffer