SN74AC563PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AC563PW Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. It is packaged in the way of Tube. It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A voltage of 2V~6V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74AC series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. This device has 20 terminations. The family 74AC563 includes it. In order to function, the supply voltage should be set to 3.3V. 20 pins are provided. In terms of electronic devices, this one is in the AC family. 20 pins are used in its design. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. 6V is the maximum voltage (Vsup) that can be supplied. 3.3/5V power supplies are needed to operate it. The supply voltage (Vsup) should be greater than 2V. Electronic circuits are represented by 8 input lines. It features maximum flexibility in design due to 24mA output current.
SN74AC563PW Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC563 family
20 pin count
20 pins
3.3/5V power supplies
SN74AC563PW Applications
There are a lot of Texas Instruments SN74AC563PW Latches applications.
- Clocks
- Shift left register
- Display driver
- Multi-line decoders
- Parallel-to-Serial Data Conversion
- General-Purpose Register
- Lamp and Display (LED)
- Serial Output Register
- Automotive Cluster
- Programmable binary
