SN74AC564DBR
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC564 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 4.9 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
SN74AC564DBR Overview
It is packaged in the way of 20-SSOP (0.209, 5.30mm Width). You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Inverted. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 95MHzin the output frequency of the device. A total of 1elements are present in it. T flip flop consumes 4μA quiescent energy. There have been 20 terminations. The 74AC564 family contains it. A voltage of 3.3V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. Devices in the ACfamily are electronic devices. Surface Mount mounts this electronic component. 20pins are included in its design. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. 8bits are used in its design. There is a 6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. To achieve this superior flexibility, 8 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. A D flip flop with 2embedded ports is available. With an output current of 24mA, it is possible to design the device in any way you want. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74AC564DBR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
SN74AC564DBR Applications
There are a lot of Texas Instruments SN74AC564DBR Flip Flops applications.
- Computers
- ESCC
- Common Clocks
- Shift registers
- 2 – Bit synchronous counter
- EMI reduction circuitry
- Counters
- Memory
- Parallel data storage
- Individual Asynchronous Resets
